Rupal Metals is a reliable Delhi-based manufacturer and supplier of premium Incoloy 800HT forgings. Renowned for precision and endurance, these forgings find application in industries where the material must deliver under harsh conditions. Rupal Metals’ Incoloy 800HT forgings are subject to strict quality inspections to meet global standards. With modern manufacturing techniques and skilled experts, Rupal Metals provides top-notch forgings to suit varied industrial demands. Their dedication to quality and timely supply makes them a choice client among clients from industries such as power generation, chemical processing, and aerospace.
Incoloy 800HT forgings contain chief constituents of nickel (30-35%), iron (balance), and chromium (19-23%), minor amounts of aluminum, titanium, and carbon. This special mix offers superior oxidation and carburization resistance at elevated temperatures. The mechanical properties consist of a tensile strength of around 75 ksi (515 MPa), yield strength of about 35 ksi (240 MPa), and elongation of around 30%. It exhibits stability and strength at high temperatures up to 1100°F (593°C) and is appropriate for severe environments where mechanical strength and corrosion resistance are equally important.
Specifications ASTM B564 / ASME SB564, AMS 5766
Flat bar blocks up to 27″ width and 15,000 lbs.
Cylinders and sleeves up to 50″ maximum O.D. and 65″ maximum length
Discs and hubs up to 50″ diameter and 20,000 lbs.
Rolled, hand forged or mandrel forged rings up to 84″ maximum O.D. and 40″ maximum length
Rounds, shafts and step shafts up to 144″ maximum length and 20,000 lbs.
| Grade | Ni | Fe | Cr | Cu | Ti | Al | C | Mn | S | Si |
| Alloy 800HT | 30.0-35.0 | 39.5 min | 19.0-23.0 | .75 max | .25-.60 | .85-1.20 | .06-.10 max | 1.5 max | .015 max | 1.0 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.94 g/cm3 | 1350-1400 ℃ | Psi – 75,000 , MPa -520 | Psi – 30,000 , MPa – 205 | 30 – 35 % |
| Density | 0.287 lb/in3 / 7.94 g/cm3 |
| Melting Point | 2475 – 2525 °F/ 1357 – 1385 °C |
| Specific Heat @ 70°F | 0.11 Btu/lb•°F |
| Permeability @ 70°F Annealed | 1.014 (200 Oersted) |
| Curie Temperature | -115 °C/ -175 °F |
| Elastic Modulus | 28.50 X 106 psi |
| Electrical Resistivity @ 70°F | 595 ohm•circ mil/ft |
| Annealling Incoloy 800 | 983 – 1038 °C / 1800 – 1900 °F |
| Annealling Incoloy 800H / Ht | 1147 – 1177°C / 2100 – 2150 °F |
| Quench | Rapid Air / Water |
| STANDARD | UNS | WNR. | AFNOR | EN | JIS | BS | GOST | OR |
| Incoloy 800HT | N08811 | 1.4959 | – | X8NiCrAlTi32-21 | NCF 800HT | NA 15(HT) | ЭИ670 | XH32T |
To determine if Incoloy 800HT Forgings meet your specific needs, assess their high-temperature resistance, oxidation, and carburization properties against your application requirements. Consulting with a supplier for detailed material specifications and testing options can also ensure compatibility.
The ideal temperature range for forging Incoloy 800HT is between 2100°F (1149°C) and 2300°F (1260°C). This range ensures optimal workability, mechanical properties, and maintains the material's strength and resistance to oxidation.
Temperature control is crucial for maintaining the desired mechanical properties of forged Incoloy 800HT, as overheating or insufficient heating can lead to reduced strength and ductility. Proper temperature management ensures optimal grain structure, resistance to oxidation, and overall performance in high-temperature applications.
Incoloy 800HT forgings find extensive applications in high-temperature industries with needs for oxidation and carburization-resistant materials. They are best suited for products like heat exchanger components, furnace components, boiler tubes, and nuclear reactors. The resistance of the alloy to thermal fatigue and stability make them apt for petrochemical processing, power plants, aerospace, and chemical industries. Rupal Metals’ Incoloy 800HT forgings find applications in gas turbines and aerospace exhaust systems, where cyclic stress durability and performance are critical. These forgings provide safety, long life, and efficiency in demanding industrial applications.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Rupal Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Delhi, India
Copyright 2024 Rupal Metals. All rights reserved
