Rupal Metals, the well-known Delhi-based manufacturer and supplier, provides a superior grade of Stainless Steel 316L Bars/Rods that are highly resistant to corrosion and possess excellent mechanical behavior. Rupal Metals, with its dedication towards precise engineering and high–quality material, provides products according to various industrial requirements and customer needs. Their 316L stainless steel bars/rods are best suited for high-performance applications, particularly where chemical and marine condition resistance is important. With industry experience spanning decades, Rupal Metals has established itself in terms of timely delivery, quality, and customer satisfaction in diverse sectors in India and overseas.
Stainless Steel 316L Bars/Rods consist mainly of iron, chromium (16–18%), nickel (10–14%), and molybdenum (2–3%), which improves corrosion resistance, particularly against chlorides. The alloy has low carbon levels that reduce carbide precipitation during welding. Mechanically, 316L has a tensile strength of approximately 485 MPa, yield strength of 170 MPa, and elongation of 40%. It exhibits good ductility, formability, and high-temperature properties, and it is suitable for pressure-containing and structural applications. Its non-magnetic quality in the annealed state contributes to its versatility in specific engineering applications.
| Specification | ASTM A276/ A479, ASME SA276/SA479 |
|---|---|
| Grade | Stainless Steel 316L (UNS S31603) |
| Flat bar size | 1/2” to 10” in thickness range of 2mm to 150mm |
| Square bar size | 18mm – 47mm (11/16″ to 1-3/4″) |
| Round bar size | Outside Diameter in the range of 4mm to 500mm |
| Hex Bar size | 18mm – 57mm (11/16″ to 2-3/4″) |
| Bright Bar | Outside Diameter in the range of 4mm to 100mm |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Rectangular bar Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Cold Drawn, Bright, Sand Blasting Finished, Hot Rolled Pickled, Hairline, Polished |
| Condition | Hardened & tempered, annealed |
| Technique | 316L Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bar, Rod, Cold Rolled |
| Processing | Bar cutting to 650mm |
| Section | 3.0 to 12.0mm thickness |
| Form | Precision Ground Bar, Flat Bar, Square, Round, Half Round Bar, Rod, Rectangle, Hex (A/F), T-Bar, Channel Bar,Blocks, Round Rod, Threaded, Profiles, Billet, Ingot, I/H Bar, Forging, Rings, Hollow, Triangle etc. |
| Our 316L Stainless Steel Round bar conforms to NACE MR0175/ISO 15156 | |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 316L | 0.3 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 16 – 18 | 2 – 3 | 10 – 14 | 0.10 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐032 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |
Stainless Steel 316L contains molybdenum, which enhances resistance to chloride-induced pitting and corrosion, making it highly suitable for marine and coastal applications.
Yes, the low carbon content in 316L minimizes carbide precipitation during welding, ensuring excellent corrosion resistance even in heat-affected zones.
Stainless Steel 316L Bars/Rods find extensive application in industry due to their durability in corrosive environments. Typical applications are chemical processing equipment, marine hardware, heat exchangers, pharmaceutical and food processing equipment, and medical implants. The resistance of Stainless Steel 316L Bars/Rods to pitting, crevice corrosion, and intergranular corrosion serves to make them suitable for service in chloride and acidic environments. In addition to this, these bars/rods are also commonly used in building structures, pulp and paper industries, and nuclear power stations, where durability and hygiene both play key roles. Weldability and ease of fabrication further increase their application in precision engineering.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Rupal Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Delhi, India
Copyright 2024 Rupal Metals. All rights reserved
