Delhi, India-based Rupal Metals is a reliable manufacturer and supplier of quality Stainless Steel 446 Bars and Rods catering to a wide range of industrial applications. As being renowned for their quality and accuracy, Rupal Metals offers SS 446 bars that provide excellent resistance against high temperature and corrosion. Their offerings conform to international standards and are designed for harsh environments like thermal processing and chemical industries. With its good reputation of reliability and timely delivery, Rupal Metals continues to serve the vital infrastructure and manufacturing industries of India and beyond.
Stainless Steel 446 Bar and Rods consist mainly of 23–27% chromium, up to 1.5% manganese, 0.2% carbon, and traces of molybdenum, silicon, and nickel. This ferritic stainless steel with high chromium content offers superior oxidation and sulfidation resistance under high temperatures. Mechanically, these bars have a tensile strength of approximately 485 MPa, yield strength of around 275 MPa, and 20% elongation. These bars are resistant to structural integrity in thermal cycling environments and have moderate corrosion resistance and toughness, making them suitable for high-heat service and chemically aggressive conditions.
| Grade | Stainless Steel 446 (UNS S44600) |
|---|---|
| Specification | ASTM A276, ASTM A479, ASTM A182 |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Cold Drawn, Bright, Sand Blasting Finished, Hot Rolled Pickled, Hairline, Polished |
| Condition | Hardened & tempered, annealed |
| Technique | 446 Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bar, Rod, Cold Rolled |
| Processing | Bar cutting to 650mm |
| Form | Precision Ground Bar, Flat Bar, Square, Round, Half Round Bar, Rod, Rectangle, Hex (A/F), T-Bar, Channel Bar,Blocks, Round Rod, Threaded, Profiles, Billet, Ingot, I/H Bar, Forging, Rings, Hollow, Triangle etc. |
| Our 446 Stainless Steel Round bar conforms to NACE MR0175/ISO 15156 | |
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Fe |
|---|---|---|---|---|---|---|---|---|---|
| SS 446 | 0.2 max | 1.5 max | 0.75 max | 0.040 max | 0.03 max | 23 – 30 | 0.10 – 0.25 | 0.50 max | Balance |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 7.5 g/cm3 | 1510 °C (2750 °F) | Psi – 75,000 , MPa – 485 | Psi – 40,000 , MPa – 275 | 20 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 446 | 1.4762 | S44600 | – | – | – | – | – |
Stainless Steel 446 Bars and Rods are known for their excellent resistance to oxidation, high temperatures, and corrosive environments. They also exhibit remarkable scaling resistance and durability, making them suitable for demanding industrial applications.
These bars and rods are widely used in industries such as petrochemical, chemical processing, power generation, and marine applications. They are also suitable for heat exchangers, boiler parts, furnace components, and high-temperature exhaust systems.
446 Stainless Steel Bars and Rods find wide usage in applications demanding resistance to extreme heat and corrosion. They are best suited for furnace parts, heat exchangers, incinerators, and boiler parts because they possess good scaling resistance. Chemical and petrochemical plants employ them in processing equipment wherein sulfidation and carburization are frequent problems. Rods are also employed in gas turbines, kilns, and power plants. They possess long service life due to their thermal stability and durability and hence can be used in both commercial and industrial high-temperature operations.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Rupal Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Delhi, India
Copyright 2024 Rupal Metals. All rights reserved
